Naturelite Putty is a water borne high quality putty for interior/exterior applications, based on secrete polymer preparations, very LOW VOC designed to provide smooth surfaces.
It can be used on interior/exterior applications on concrete, cement and brick surfaces. After sanding it provides smooth surfaces.
how to use
All new surfaces must be cured at least for 30 days prior to surface preparation for paint applications.
Remove old paint from surfaces completely. Make sure the surface is clean, dry, free from dust, oil, grease, salt & mold.
Apply single coat of Naturelite primer and wait for its drying time of 4-6 hours.
Use Naturelite Wall Putty to the dents, pores and cracks for smoothening the surfaces and wait for 4-6 hours.
Sand the surfaces using emery paper 180 and clean the surfaces from dust.
Apply another coat of Naturelite primer and use Emery paper 320 and make sure the surface is free from dust.
Surface temperature required during application must not be less than 10° c the surface moisture should not exceed 8% and the relative humidity at work place not to exceed 70%.