Excellence Emulsion

DOWNLOAD BROCHURE

DOWNLOAD DATASHEET

Dew Drops

Excellence Emulsion

Naturelite ‘Dew Drops’ is an exterior emulsion paint, based on 100% pure acrylic resins, which is specially designed for exterior applications in all weather conditions. Dew Drops provides excellent adhesion, excellent weather resistance, UV resistance, hiding property, color retension property, Scrub and water resistance property, excellent whiteness, Levelling property and excellent spread rate also. The product shows excellent resistance to microbial growth including bacteria, molds and mildews, which makes the product idle for the exterior applications.

SPECIAL ADVANTAGES

Green Assured

Excellent Color Retention

Anti-Microbial

Excellent Adhesion

Stain Resistance

Weather Resistance

Excellent Coverage

Long Durability

Green ADVANTAGES

Low Voc
APEO FREE
Phthalates Free
No Added Formaldehyde
No Added Lead
No Added Ammonia
No Added Arsenic
Low Odour
No Added Chromium

available

packets

  • 01 - litre
  • 04 - litre
  • 10 - litre
  • 20 - litre

available

finishes

  • Colour Shade

    matt

available

store

  • India
  • Kerala
  • Alappuzha

Paint

How To Apply

how to use

  • All new surfaces must be cured at least for 30 days prior to surface preparation for paint applications.

  • Remove old paint from surfaces completely. Make sure the surface is clean, dry, free from dust, oil, grease, salt & mold.

  • Apply single coat of Naturelite primer and wait for its drying time of 6-8 hours. ° Use Naturelite Wall Putty to the dents, pores and cracks for smoothening the surfaces and wait for 4-6 hours.

  • Sand the surfaces using emery paper 180 and clean the surfaces from dust.

  • Apply another coat of Naturelite primer and use Emery paper 320 and make sure the surface is free from dust.

  • Finally Apply two coat of Dew Drops Exterior emulsion with an interval of4-6 hours drying time can provide a better result, an extra coat may be used for dark shades if needed

  • Surface temperature required during application must not be less than 10° c; the surface moisture should not exceed 8% and the relative humidity at work place not to exceed 70%.